Git Integration for Choreo Connect

The following section provides information on how to integrate Choreo Connect with Git for version controlling of API artifacts.

When Choreo Connect is used as a standalone gateway, APIs can be deployed through the APICTL command-line tool. Once an API project is added/updated, it must be deployed/redeployed using APICTL. If the Adapter container restarts for any reason, the APIs deployed with APICTL will be lost. To address this requirement, Choreo Connect supports the use of Git for version controlling of API artifacts.

How it works

The source watcher in the Adapter, is responsible for deploying the API artifacts, with the help of Git based to the following steps.

Git Integration

  1. You need to have a repository with the API projects, hosted on a source control system (e.g., GitHub, Bitbucket).

  2. When the Adapter starts, the source watcher will clone the API project(s) from the given repository and will deploy the API artifacts.

  3. The source watcher will then start polling the repository for changes.

  4. If there are any updates in the repository, the source watcher will fetch the changes and will deploy the updated API artifacts.

Configuring Git Integration for Choreo Connect

Follow the instructions below to configure Git Integration for Choreo Connect:

Step 1 - Initialize Git repository

  1. Initialize the API project(s).

    For more information, see Choreo Connect Deployed on Docker with ESB API Controller Guide.

  2. Create a new repository on any of the following Git hosting services.

    Note

    Maintain the following folder structure when pushing the API project(s) to the repository.

     <api-project-1>
     ├── Client-certificates
     ├── Definitions
     │   └── swagger.yaml
     ├── Docs
     ├── Endpoint-certificates
     ├── Image
     ├── Interceptors
     ├── README.md
     ├── Sequences
     │   ├── fault-sequence
     │   ├── in-sequence
     │   └── out-sequence
     ├── api.yaml
     ├── api_meta.yaml
     └── libs
     <api-project-2>
     ├── Client-certificates
     ├── Definitions
     │   └── swagger.yaml
     ├── Docs
     ├── Endpoint-certificates
     ├── Image
     ├── Interceptors
     ├── README.md
     ├── Sequences
     │   ├── fault-sequence
     │   ├── in-sequence
     │   └── out-sequence
     ├── api.yaml
     ├── api_meta.yaml
     └── libs
     <api-project-3>.zip

Step 2 - Configure Choreo Connect with Git

Git Integration in Choreo Connect works in the standalone mode.

Step 2.1 - Enable Git for version controlling of API artifacts

Add the following configuration under the Adapter section of the main configuration file of Choreo Connect (config.toml file) to enable Git for version controlling of API artifacts.

[adapter]

artifactsDirectory = "<path_to_the_artifacts_directory>"

[adapter.sourceControl]
  enabled = true
  pollInterval = 30
  retryInterval = 5
  maxRetryCount = 20
  artifactsDirectory = "<path_to_the_artifacts_directory>"
  [adapter.sourceControl.repository]
    URL = "https://<hostname>/<username_or_organization>/<repository-name>.git"
    branch = "<branch_name>"
    username = $env{git_username}
    accessToken = $env{git_access_token}
    sshKeyFile = "/home/wso2/ssh-keys/<private_key_file>"
[adapter]

artifactsDirectory = "/home/wso2/git-artifacts"

[adapter.sourceControl]
  enabled = true
  pollInterval = 30
  retryInterval = 5
  maxRetryCount = 20
  artifactsDirectory = "/home/wso2/git-artifacts"
  [adapter.sourceControl.repository]
    URL = "https://github.com/wso2/product-microgateway.git"
    branch = "main"
    username = $env{git_username}
    accessToken = $env{git_access_token}
    sshKeyFile = "/home/wso2/ssh-keys/id_ed25519"

The following table describes the above configuration.

Property Description
enabled Set this to true to enable Git integration for API Artifacts.
pollInterval The time interval (in seconds) in which the Adapter should fetch updates from the repository.
retryInterval The time interval (in seconds) in which the Adapter should retry fetching artifacts from the repository at startup (in case of failure).
maxRetryCount Maximum number of times the Adapter should retry fetching artifacts from the repository at startup (in case of failure).
artifactsDirectory The directory path where the Git artifacts are stored.
URL The URL of the Git repository.
branch The branch of the Git repository. If not specified, the default branch will be used.
username The username of the Git repository. If this is set, then you need to also set the accessToken.
accessToken The password or personal access token of the Git repository.
sshKeyFile sshKeyFile is the optional path to the private key used for authenticating the Git repository. If this is set, then you do not need to set the username and accessToken.

Note

  • Both artifactsDirectory configurations should be set to the same directory path.
  • If the branch is not specified, the default branch will be used.
  • If the repository is a public repository (in GitHub), then you do not need to set username, accessToken and sshKeyFile.
  • If the repository is a private repository, then you need to set either the username and accessToken or sshKeyFile.

Step 2.2 - Authenticate the source watcher with the repository

The source watcher needs to be authenticated with the Git repository to fetch the artifacts. Authenticating the Git repository can be done in the following ways:


Using the Username and Access Token

To authenticate the repository with basic HTTP authentication, the username and access token should be set in the username and accessToken fields. The password can also be set in the accessToken field. It is recommended to use the personal access token for authentication. For public repositories (in GitHub), the username and accessToken fields can be kept empty.

  1. Generate a personal access token.

  2. Configure Choreo Connect.

    Add the following configuration in the main configuration file of Choreo Connect (config.toml file).

      [adapter]
    
      artifactsDirectory = "<path_to_the_artifacts_directory>"
    
      [adapter.sourceControl]
        enabled = true
        pollInterval = 30
        retryInterval = 5
        maxRetryCount = 20
        artifactsDirectory = "<path_to_the_artifacts_directory>"
        [adapter.sourceControl.repository]
          URL = "https://<hostname>/<username_or_organization>/<repository-name>.git"
          branch = ""
          username = $env{git_username}
          accessToken = $env{git_access_token}
          sshKeyFile = ""
      [adapter]
    
      artifactsDirectory = "/home/wso2/git-artifacts"
    
      [adapter.sourceControl]
        enabled = true
        pollInterval = 30
        retryInterval = 5
        maxRetryCount = 20
        artifactsDirectory = "/home/wso2/git-artifacts"
        [adapter.sourceControl.repository]
          URL = "https://github.com/wso2/product-microgateway.git"
          branch = ""
          username = $env{git_username}
          accessToken = $env{git_access_token}
          sshKeyFile = ""

Using the SSH Key file

To authenticate the repository with SSH key, the SSH private key file path should be set in the sshKeyFile field.

  1. Generate the SSH Keys that need to be used for authentication.

    Important

    Make sure to keep the passphrase of the SSH key empty.

  2. Configure Choreo Connect.

    Add the following configuration in the main configuration file of Choreo Connect (config.toml file).

      [adapter]
    
      artifactsDirectory = "<path_to_the_artifacts_directory>"
    
      [adapter.sourceControl]
      enabled = true
      pollInterval = 30
      retryInterval = 5
      maxRetryCount = 20
      artifactsDirectory = "<path_to_the_artifacts_directory>"
      [adapter.sourceControl.repository]
          URL = "git@<hostname>:<username>/<repository-name>.git"
          branch = ""
          username = ""
          accessToken = ""
          sshKeyFile = "/home/wso2/ssh-keys/<private_key_file>"
      [adapter]
    
      artifactsDirectory = "/home/wso2/git-artifacts"
    
      [adapter.sourceControl]
      enabled = true
      pollInterval = 30
      retryInterval = 5
      maxRetryCount = 20
      artifactsDirectory = "/home/wso2/git-artifacts"
      [adapter.sourceControl.repository]
          URL = "git@github.com:wso2/product-microgateway.git"
          branch = ""
          username = ""
          accessToken = ""
          sshKeyFile = "/home/wso2/ssh-keys/id_ed25519"
  3. Copy the generated private key file to the docker-compose/resources/adapter/ssh-keys directory.

  4. Add volume mapping.

    1. Open the docker-compose.yaml file located in the <CHOREO-CONNECT-HOME>/docker-compose/choreo-connect directory.
    2. Find the volumes section under the adapter and add the following volume mapping:

      volumes:
          ...
          - ../resources/adapter/ssh-keys:/home/wso2/ssh-keys
  5. Create a Dockerfile.

    When using authentication with a SSH key file, you need to create a custom Docker image of the Adapter as mentioned below:

      FROM wso2/choreo-connect-adapter:<tag>
    
      USER root
    
      RUN apk add openssh-client
    
      RUN mkdir /home/wso2/.ssh && chown -R wso2:wso2 /home/wso2/.ssh \
          && ssh-keyscan -H <hostname> >> /home/wso2/.ssh/known_hosts
    
      USER wso2
    
      CMD eval "$(ssh-agent -s)" ; ssh-add /home/wso2/ssh-keys/* ; ./adapter
      FROM wso2/choreo-connect-adapter:1.2.0
    
      USER root
    
      RUN apk add openssh-client
    
      RUN mkdir /home/wso2/.ssh && chown -R wso2:wso2 /home/wso2/.ssh \
          && ssh-keyscan -H github.com >> /home/wso2/.ssh/known_hosts
    
      USER wso2
    
      CMD eval "$(ssh-agent -s)" ; ssh-add /home/wso2/ssh-keys/* ; ./adapter
  6. Build the new image.

    docker build -t <IMAGE_NAME> -f <DOCKER_FILE_PATH> <CONTEXT>
    docker build -t myimages/choreo-connect-adapter-ssh:1.0.0 -f Dockerfile .
  7. Update the docker-compose.yaml file with the new Adapter image.

Step 3 - Start Choreo Connect

Start Choreo Connect on Docker Compose by executing the Docker Compose script inside the <CHOREO-CONNECT_HOME> directory.

  1. Navigate to <CHOREO-CONNECT_HOME>/docker-compose/choreo-connect/ directory.

  2. Execute the following command.

     docker-compose up -d

After the containers are up and running, you can monitor the status of the containers by using the following command.

docker ps | grep choreo-connect-

Step 4 - Invoke the sample API

Step 4.1 - Obtain a token

After the APIs are exposed via ESB Choreo Connect, you can invoke an API with a valid token (JWT) or by using a test key.

Let's use ESB Choreo Connect's test key endpoint to obtain a test key in order to access the API. For more information, see Generate a Test JWT.

TOKEN=$(curl -X POST "https://localhost:9095/testkey" -d "scope=read:pets" -H "Authorization: Basic YWRtaW46YWRtaW4=" -k -v)

More information

You can obtain a JWT token from any third-party secure token service or via the MWARE ESB.

Step 4.2 - Invoke the API

Execute the following command to invoke the API using the test key. You can now invoke the API running on the ESB Choreo Connect using the following cURL command.

curl -X GET "https://<CHOREO-CONNECT_ROUTER_HOST>:<CHOREO-CONNECT_ROUTER_PORT>/<API-context>/<API-resource>" -H "accept:application/xml" -H "Authorization:Bearer $TOKEN" -k
curl -X GET "https://localhost:9095/v2/pet/findByStatus?status=available" -H "accept: application/xml" -H "Authorization:Bearer $TOKEN" -k
Top